The Ultimate in Integration Wires are...
The Ultimate in Integration
Wires are the only things lacking in this new mini-quad.
Warning: Last items in stock!
The ImmersionRC team combined a unique foldable mini-quad frame, and added the stuff that ImmersionRC does well.
An integrated full-graphic OSD, coupled directly to a flight controller pre-loaded with Cleanflight. Drive that into a custom, integrated, 5.8GHz video transmitter with a punchy 350mW output power, just right for FPV racing with friends.
Just add a compatible R/C Rx (EzUHF preferred of course), and a battery, and go fly, everything else is included, from the SpiroNET Tx antenna, to the props.
NOTE: Compatible receiver and display device required for initial setup and during use, items not included.
Integrated 5.8GHz Video Tx
An on-board NexWaveRF 5.8GHz video transmitter, with 40 channel support, ensures compatibility with any 5.8Ghz A/V Rx on the market.
ImmersionRC’s exclusive RaceBand allows 8 pilots to fly together, while being 100% legal for US resellers to distribute. All channels fall within the legal US Ham band.
The on-board OSD allows video transmitter channels to be chosen using the R/C transmitter, no more dip-switches to flip, and no more frequency lists to remember.
Full compatibility with all ImmersionRC/FatShark, Boscam, Team Black-Sheep, DJI, and ImmersionRC RaceBand channels.
NOTE: US Resellers may lock domestic shipments to avoid channels outside the legal Ham band.
Flexible Flight Controller
The integrated flight controller, with 3 axis Gyro, 3 axis Accelerometer, and barometer, is pre-programmed with CleanFlight, and is future-proof, supporting future updates.
A direct, high-speed interface to the full-graphic OSD, and a USB port on the back of the quad for programming and updates, complete the package.
PIDs are adjusted on-screen, in easy-to-use menus, driven directly from the R/C Tx.
Flexible Camera Options
The flexible Vortex camera mount supports both a flight cam, and an HD camera such as a GoPro, or Mobius.
The flight cam is protected from impacts, and is suspended from a vibration-dampened carbon-fibre plate. An adjustable bracket allows the camera to be tilted to ensure a good forward view during high-speed racing.
As the icing on the cake, a monster 3A switching regulator allows any HD cam (GoPro included) to be powered from the flight pack, allowing unnecessary camera batteries to be left at home.
Pro-Tuner, In The Box
The Vortex includes an industry-first, tuning parameters from Pro-Racers right in the box. Just select the racer, prop size, HD camera choice, etc. and the Vortex OSD will setup the flight controller for you.
Some of the biggest names in FPV Quad Racing have abused countless LiPos tuning the Vortex for peak performance, and have produced some stunning videos in the process.
Lights!, Music!, Action!!!
Ok, there is no music, we’ll leave that to the post-processing, but there are lights, and plenty of action!
A set of 8 24-bit RGB LEDs sit on the tail of the Vortex, sandwiched safely between the upper, and lower frame plates.
These LEDs, controlled by a dedicated 32-bit ARM processor (yeah… what were we thinking!), can show something as mundane as the pilot’s favourite color, just about anything else we decide to roll into the user-upgradable firmware.
Brake lights?, Shift to white for max. acceleration?, Indicators for polite left/right turns?, or just a pattern to remind you of 80’s Discos.
Since Airgonay’s now-famous ‘Star Wars’ video, rear lights on miniquads have become not a ‘nice to have’, but a ‘no fun without ’em’.
Custom 32-bit, 12A ESCs, with OneShot125
Custom 12A ESCs (16A Peak), with OneShot125, and regenerative braking, for crisp-responsive flight using CleanFlight. A 32-bit ARM processor runs each ESC, ensuring plenty of processing power to drive even the most fussy brushless motors.
These ESCs are the first worldwide to use our unique rotorSENSE, which programs prop direction with the flick of a finger. No more swapping motor wires.
ESCs so thin, that they fit completely into the arm tubes, protected from the elements, and the occasional passing.
Recliners, and Incliners
As racing quads approach race-speeds, HD cameras have a habit of recording very high definition footage of… the ground. Two optional kits available for the Vortex provide a recliner for the GoPro, or an incliner for the Mobius camera.
These kits are shipped with the appropriate rubber dampers, and in the case of the GoPro kit, also a plug-and-play power cable, to allow the GoPro to be powered without an internal battery (and it’s unwanted weight).
An on-board 3 Amp, 5V switching regulator keeps the electronics fed with a clean supply, with enough left over to power a GoPro, Mobius, or any other camera which requires a clean 5V supply.
Full Graphic OSD, with EzOSD pedigree
An on-board full-graphic OSD provides in-flight updates of critical parameters, and sports a menu which allows all options to be programmed in the field using the R/C Tx, and a set of goggles, or an LCD screen.
A real-time interface with the flight controller enables artificial horizons, F-18 style displays, and exchange of flight parameters.
Seven! 32-bit ARM processors
There are not many quads out there with that claim to fame… the Vortex sports no less than seven 32-bit ARM processors, all working together for maximum fun-factor.
A dedicated ARM for the flight controller, another for the full-graphic OSD, even another for the LED board at the back of the quad, and then four high performance ARMs for the custom ESCs.
Custom OSD Layouts
Several OSD layouts are included in the package:
Needed to Complete: