Prices are tax excluded
<p>Mantap juragan Christ ni... Baik, dan memberikan solusi...
Hyperion EOS 0606i 6S 6A max CHARGER AC/DC now with STORE MODE. Integrated LBA balancer for LiPoly(3.7v), LiFePO4/A123(3.3v). Also Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC and 100v~240V AC Inputs - Hyperion and XH Balance Multi-Adapter included for 2S to 6S packs!
The Super DUO is not to be confused with past models bearing the 0720 designation as they were all single-port chargers. This charger is sporting two identical output ports, each port capable of providing 500W of raw charging power. "0720" is to be interpreted as 7 Cells max - 20Amps max - per port, being a DUO charger.
This is the Hyperion EOS 0730i Net3 Li/NiMH/A123 Balancing Charger. The Hyperion EOS0730iNET3 is an excellent choice for anyone charging battery packs up to 7S. With an astonishing charge rate of 30 Amps, and 550 Watt output it is possible to speed charge high capacity lipos packs at 5C. Even 6S packs as large as 5000mAh can be refueled in under 20 minutes.
This is the Hyperion Multi-Adapter Balancer Board for Hyperion Balance Chargers. This adapter allows you to balance a 2S to 7S via one harness. Great adapter when you have packs with different cell counts. Eliminates the need to purchase individual harnesses. Works with Hyperion chargers / balancers only. Plug only 1 battery in at a time during balancing.
The Latest 2016 Model Hyperion Sentry 3 Battery Balancer, Checker, and Discharger.
This is a Hyperion Multi-Adapter Balance Cable. This harness fits between the HP-EOSLBA-7Uxx Multi-Adapters and EOS 0720i/730I Balance Chargers.
Strap your Batteries or tidy up your setup.
Ideal for charging your LiPos, transporting them to your field or taking them along for travel.
Hyperion quality products!
This is a Standard Servo Extension with Futaba J Connectors. This extension connects between the receiver and the servo to extend the wire, suitable for use in giant scale models. Comes with a male "J" connector on one end and female "J" connector on other end.
XT90 Connectors have 5mm pins and are made from high-temp Nylon and gold plated solid bullet connectors, both included in the injection mold at the time the connector is formed.